Snowcoat PRO
Smooth Interior Finish At A Practical Price
An interior emulsion made for value without giving up the finish. Snowcoat PRO is built from a careful selection of raw materials and additives that flow out smoothly, dry quickly, and help your inside walls resist alkali and fungal or algae growth.
Excellent performance at optimum price
Good coverage
Hassle-free application
Low VOC
Hazardous chemical free
No added heavy metal
Guidance
Frequently asked
Application guidelines, drying time and care instructions for Snowcoat PRO.
What is Snowcoat PRO Acrylic Emulsion Paint and where can it be applied?
Snowcoat PRO is an interior emulsion paint designed as a value option with a smooth finish. It is used on interior cement and plastered walls, and its additives help prevent fungal and algae growth while giving alkali resistance.
What is the recommended dilution ratio for Snowcoat PRO?
Dilute 1 litre of Snowcoat PRO Acrylic Emulsion Paint with 500 to 600 ml of potable water. Do not over-dilute, and do not add any stainer other than machine colorants.
What is the coverage and what pack sizes are available?
On a smooth surface with no suction, coverage is approximately 180 to 200 sq. ft. per litre per coat. Actual coverage varies with the porosity and texture of the wall. Pack sizes are 1 L, 4 L, 10 L, and 20 L.
What is the drying time and recoating period?
It is dry to touch in about 30 minutes at 30°C and 65% relative humidity. Apply the next coat after 4 to 6 hours.
What is the complete step-by-step application procedure?
Step 1: Apply Snowcare Wall Putty or Snowcem Acrylic Putty with a trowel and allow overnight drying. Step 2: Apply 1 coat of Snowpearl Interior Primer, allow 4 hours drying, then sand lightly with 320 emery paper and dust off. Step 3: Apply the 1st coat of diluted Snowcoat PRO Acrylic Emulsion Paint (allow 4 to 6 hours drying). Step 4: Apply the 2nd coat of diluted Snowcoat PRO Acrylic Emulsion Paint (allow 4 to 6 hours drying). Note: Primer application is mandatory. Horizontal surfaces such as window tops and ledges should get 3 coats for better protection, and some shades may need a third coat for full hiding.
How many shades are available for Snowcoat PRO?
It is available in more than 300 shades from the Snowcem Paints Colour Spectra. Light shades are recommended for this product.
How should the surface be prepared before painting?
New plaster must cure completely, with a minimum of 28 days. The surface should be clean, sound and free from dust, oil, grease and loose material, which can be removed with a scraper or stiff wire brush. Fill cracks up to 3 mm, holes and dents with Snowcare Wall Putty or a 1:3 mix of white cement and fine sand. Treat any continuous seepage or dampness before painting.
Is Snowcoat PRO eco-friendly and safe?
Yes. It contains less than 40 g/L VOCs and qualifies for GRIHA and LEED green building criteria. It is free from lead, chromium (VI), cadmium and mercury, and does not contain formaldehyde, phenolic compounds or benzene.
What are the technical details and shelf life?
It is a thixotropic paint based on an acrylic emulsion binder with additives, applied by brush, roller or spray. Dry film thickness is 50 to 60 microns over two coats. Store the container upright, lid tightly closed, in a cool and dry place. Shelf life is 1 year from the date of manufacture.
Value & Economy Interior Emulsions
Other products in this range
Work Out Exactly How Much Paint You Need
Enter your room size and pick a finish — the calculator tells you the litres of primer, putty and paint for every coat, with no guesswork.
Need Help? Get in Touch with Us
Bid goodbye to your home painting hassles with our expert supervision