Zenita Velvet Finish

Zenita Velvet Finish is a super-premium interior luxury emulsion formulated with special binders and additives. It provides a high-sheen, diamond-like glow, a velvet-like touch, and best-in-class stain and water repellence.

Dilute 1 liter of Zenita Velvet Finish with 400 ml of clean potable water. Do not over-dilute or add any stainers or colorants.

On normal masonry surfaces with no suction, it offers a coverage of approximately 260 to 300 sq. ft. per liter per coat. Pack sizes available are 1 L and 4 L containers.

It becomes touch dry in 20 to 30 minutes (at 30°C / 65% RH). The recommended recoating interval between coats is 4 to 6 hours.

Step 1: Apply 1 coat of Snowcare Sealer & Primer or Zenita Basecoat (diluted with 500 ml water per liter) and let it dry for 4 hours. Step 2: Apply Snowcare Wall Putty or Snowcem Acrylic Putty (40% dilution) and allow overnight drying. Step 3: Apply a 2nd coat of Snowcare Sealer & Primer or Zenita Basecoat (diluted with 500 ml water per liter) and let it dry for 4 hours. Step 4: Apply the 1st coat of diluted Zenita Velvet Finish (dry for 4–6 hours). Step 5: Apply the 2nd coat of diluted Zenita Velvet Finish (dry for 4–6 hours). Note: Application of a suitable primer is mandatory.

New masonry surfaces must be allowed to cure completely for at least 28 days. Ensure the wall is clean, sound, and free of dirt, oil, or loose material. Cracks up to 3mm should be filled using Snowcare Wall Putty or a 1:3 mix of White Cement and fine sand.

Yes, it meets GRIHA and LEED Green Building criteria. It contains low VOC levels (< 40 g/L / 13%) and is completely free from lead, mercury, chromium (VI), cadmium, formaldehyde, benzene, and phenolic compounds.

It has a shelf life of 3 years from the manufacturing date when stored in airtight containers in a cool, dry place. For best performance, wash and clean the painted surface at regular 6-month intervals.