Acrylic Putty

Snowcem Acrylic Wall Putty is a ready-to-use acrylic finishing plaster in paste form formulated with ultrafine minerals, biocides, and alkali-resistant acrylic polymers for interior walls. It provides superior whiteness, smoothness, and flexibility to prevent wall cracking.

No, it comes in a ready-to-use paste form with ideal workability and does not require dilution with water. However, if thinning is required for application, a small amount of clean water can be added.

Thanks to its high adhesive strength, it eliminates the need for primers, neeru, or plaster of Paris underneath. However, applying 1 coat of primer over the putty before topcoat emulsion application is recommended for optimal paint finish and life.

When mixed to the proper consistency, it covers approximately 20 to 25 sq. ft. per kg for up to 1.5 mm thickness in 2 coats. It is available in 1 kg, 5 kg, and 20 kg plastic containers, as well as 5 kg and 20 kg poly bags.

It becomes touch dry in 4 hours under normal conditions. The recommended recoating time between coats is 6 to 8 hours.

Step 1: Sand the plaster surface with 180 emery paper and wipe clean. Step 2: Apply 1 coat of Snowcem Interior Primer. Step 3: Apply the 1st coat of Acrylic Wall Putty using a trowel or putty knife and let it dry for 6–8 hours. Step 4: Apply the 2nd coat of Acrylic Wall Putty and let it dry for 6–8 hours. Step 5: Lightly sand with 320 emery paper, clean the dust, and apply 1 coat of primer followed by 2–3 coats of topcoat emulsion paint.

New masonry surfaces must be allowed to cure completely for a minimum of 28 days prior to application.

Yes, it satisfies GRIHA / LEED Green Building criteria. It contains low VOC levels (< 40 g/L / 13%) and is free from toxic heavy metals (lead, chromium VI, cadmium, mercury) and hazardous chemicals (formaldehyde, benzene, phenolic compounds).