Wall Putty
White Portland Cement-Based Interior & Exterior Wall Putty
A combination of white Portland cement, natural minerals, special additives, and polymers, Snowcare Wall Putty is developed to add strength, durability, and waterproof your interior and exterior walls for a longer life.
Adds strength to the surface
Water resistant
Increases durability of the surface
Provides smooth and uniform finish
Abrasion resistant
Prevents algae and fungi growth
Guidance
Frequently asked
Application guidelines, drying time and care instructions for Wall Putty.
What is Snowcare Wall Putty and where can it be applied?
Snowcare Wall Putty is a white Portland cement-based powder formulated with natural minerals, polymers, and special additives. It is suitable for both interior and exterior wall surfaces to hide minor imperfections, fill pinholes, and prevent hairline cracks.
What is the mixing ratio and application pot life for Snowcare Wall Putty?
Mix 1 kg of Snowcare Wall Putty with 400 ml of clean potable water (40% dilution by volume). Let the mix stand for 10 to 15 minutes before applying. Do not over-dilute. Once mixed with water, the paste must be used within a pot life of 1 hour.
What is the coverage and what pack sizes are available?
When mixed to the proper consistency, it covers approximately 10 to 12 sq. ft. per kg for up to 1.5 mm thickness in 2 coats. Available pack sizes are 1 kg, 5 kg, 20 kg poly bags, and 40 kg sacks for projects.
Does Snowcare Wall Putty require water curing after application?
No, Snowcare Wall Putty does not require curing with water after application.
What is the drying time and recoating interval?
It becomes touch dry in 4 hours. The recommended recoating time between coats is 6 to 8 hours.
What is the complete step-by-step application process?
Step 1: Sand the plaster surface with 180 emery paper and wipe clean. Step 2: Pre-wet the surface with water before applying the 1st coat. Step 3: Apply the 1st coat using a trowel or putty knife and let it dry for 6–8 hours. Step 4: Apply the 2nd coat and allow it to dry for 6–8 hours. Step 5: Lightly sand the dried surface with 320 emery paper, wipe off dust, and apply 1 coat of primer followed by 2–3 coats of emulsion paint.
How long should fresh masonry surfaces cure before applying putty?
New plastered walls must cure completely for a minimum of 28 days before applying wall putty.
Is Snowcare Wall Putty eco-friendly and VOC-free?
Yes, Snowcare Wall Putty contains ZERO VOCs. It is completely free from lead, mercury, chromium (VI), cadmium, formaldehyde, benzene, and phenolic compounds.
Cement-Based Basecoat
Other products in this range
Work Out Exactly How Much Paint You Need
Enter your room size and pick a finish — the calculator tells you the litres of primer, putty and paint for every coat, with no guesswork.
Need Help? Get in Touch with Us
Bid goodbye to your home painting hassles with our expert supervision