Outweather

Outweather Acrylic Emulsion Paint is an economical exterior acrylic emulsion formulated with a special acrylic binder and biocides. It provides protective and decorative benefits, prevents peeling or cracking, and offers anti-algal, anti-fungal, and high color retention properties. It is suitable for exterior walls and can also be used on interior walls.

Mix 2 parts of Outweather Acrylic Emulsion Paint with 1 part of clean potable water by volume (2:1 ratio) for better brushability. Do not over-dilute, use thinners, or add universal stainers.

It offers an approximate coverage of 110 to 130 sq. ft. per liter per coat on normal surfaces. Container sizes available are 1 L, 4 L, 10 L, and 20 L.

Touch dry time is 15 to 20 minutes. The recommended recoating interval between coats is 4 to 6 hours.

Step 1: Apply Snowcare Wall Putty (optional) using a trowel and allow overnight drying. Step 2: Apply 1 coat of Snowcem EXT/INT Primer and allow 4 hours drying time. Step 3: Apply the 1st coat of diluted Outweather Acrylic Emulsion Paint (allow 4–6 hours drying time). Step 4: Apply the 2nd coat of diluted Outweather Acrylic Emulsion Paint (allow 4–6 hours drying time). Note: Primer application is mandatory, and horizontal surfaces (top of windows, ledges) require 3 coats for greater protection.

It is available in 300+ light shades as per the Snowcem Paints Colour Spectra (recommended for light shades only).

Fresh plaster must cure for at least 28 days. Clean the surface free of loose paint, dust, oil, or fungal growth using wire brushing and water. For old, friable, or difficult surfaces, a coat of Snowsol Stabilising Solution is recommended. Fill cracks up to 3mm using Snowcare Wall Putty or a 1:3 mix of White Cement and fine sand.

Yes, it satisfies GRIHA and LEED Green Building criteria. It contains low VOC levels (< 40 g/L / 13%) and is completely free from lead, mercury, chromium (VI), cadmium, formaldehyde, benzene, and phenolic compounds.