Snowcem Plus Shine

Snowcem Plus Shine is a water-based exterior emulsion formulated with an acrylic emulsion binder. It gives exterior walls a high sheen finish and is best suited for climates ranging from dry to lightly humid. It resists fading, chalking, flaking, and fungal/algal growth while providing protective and decorative benefits.

Combine 1000 ml of Snowcem Plus Shine Paint with 500 to 600 ml of clean potable water. Do not over-dilute or add thinners or universal stainers.

• 1 Coat Coverage: 100 to 140 sq. ft. per liter. • 2 Coat Coverage: 50 to 70 sq. ft. per liter. Available pack sizes are 1 L, 4 L, 10 L, and 20 L containers.

Surface dry time is 30 minutes. The recommended recoating interval between coats is 4 to 6 hours.

Step 1: Apply Snowcare Wall Putty (optional, mixed at 400 ml water per 1000 gm putty) and allow overnight drying. Step 2: Apply 1 coat of Special CW Primer or Universal Primer (allow 4 hours drying time). Step 3: Apply the 1st coat of diluted Snowcem Plus Shine Exterior Emulsion Paint (allow 4–6 hours drying time). Step 4: Apply the 2nd coat of diluted Snowcem Plus Shine Exterior Emulsion Paint (allow 4–6 hours drying time). Note: Horizontal surfaces (top of windows, parapet tops) require 3 coats for thorough protection.

Fresh masonry must cure for at least 28 days. Clean off dust, oil, grease, and loose paint thoroughly using wire brushing and water. For old, friable, or difficult surfaces, a coat of Snowsol Stabilising Solution is recommended. Fill cracks up to 3mm using Snowcare Wall Putty or a 1:3 mix of White Cement and fine sand.

Yes, it satisfies GRIHA and LEED Green Building criteria. It contains low VOC levels (< 40 g/L / 13%) and is completely free from lead, mercury, chromium (VI), cadmium, formaldehyde, benzene, and phenolic compounds.

It has a shelf life of 3 years when stored in airtight containers in a cool, dry place. For optimal performance, wash and clean the wall surface at regular 6-month intervals.