Trump

Trump Exterior Emulsion Paint is an economical acrylic emulsion formulated with a special acrylic binder and biocides. It provides fade-resistant protection against algae, fungi, alkali, and UV radiation for exterior surfaces, though it can also be used for interior walls.

Mix 2 parts of Trump Exterior Emulsion Paint with 1 part of clean potable water by volume (2:1 ratio) for better brushability. Do not over-dilute or add any thinner or universal stainer.

It offers an approximate coverage of 110 to 150 sq. ft. per liter per coat. Pack sizes available are 1 L, 4 L, 10 L, and 20 L containers.

Touch dry time is 15 to 20 minutes. The recommended recoating interval between coats is 4 to 6 hours.

Step 1: Apply Snowcare Wall Putty (optional) using a trowel and allow overnight drying. Step 2: Apply 1 coat of Snowcem Special CW Primer and allow 4 hours drying time. Step 3: Apply the 1st coat of diluted Trump Exterior Emulsion Paint (allow 4–6 hours drying time). Step 4: Apply the 2nd coat of diluted Trump Exterior Emulsion Paint (allow 4–6 hours drying time). Note: Primer application is mandatory, and horizontal surfaces (top of windows, ledges) require 3 coats for greater protection.

Fresh masonry must cure for at least 28 days. Clean the surface free of loose paint, dust, oil, or fungal growth using wire brushing and water. For old, friable, or difficult surfaces, a coat of Snowsol Stabilising Solution is recommended. Fill cracks up to 3mm using Snowcare Wall Putty or a 1:3 white cement to fine sand mix.

Yes, it satisfies GRIHA and LEED Green Building criteria. It contains low VOC levels (< 40 g/L / 13%) and is completely free from lead, mercury, chromium (VI), cadmium, formaldehyde, benzene, and phenolic compounds.

It has a shelf life of 3 years when stored in airtight containers in a cool, dry place. For best performance, wash and clean the surface at regular 6-month intervals.